![]() Connect your router to your modem or modem router.Make sure the power switch in the | (on) position. Position the antennas straight up and plug in the router to a power source.If you have a modem router, leave it connected. If you have a separate modem and standalone router, disconnect and remove your old router. To complete setup, you will need a computer to visit in a web browser.Note-For best performance, use CAT5e or higher rated cables on the internet port.Įthernet activity lights-Flash when there is traffic over an ethernet port. Internet port (7)-Connect an ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband or fiber modem. WPS setup light (6)-Flashes during a WPS pairing process. Power switch (5)-Press | (on) to turn on the router. Note-For best performance, use CAT5e or higher-rated cables on the ethernet ports. You can also restore the factory settings using the Linksys app or at Ethernet ports (4)-Connect ethernet cables to these blue gigabit (10/100/1000) ports, and to wired devices on your network. Reset button (3)-Press and hold for until the light on the top of the router starts flashing to reset the router to factory settings. Wi-Fi Protected Setup button (2)-Press to configure wireless security on Wi-Fi Protected Setup enabled network devices. Power port (1)-Connect the included AC power adapter. It flashes quickly when indicating connection errors. It flashes or pulses slowly during startup, self-testing, and firmware upgrades. Light-The light stays on steadily while connected to the internet. USB 3.0 Port-Connect and share a USB drive or USB printer on your network or on the internet.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |